NEW – LT-3100S IRIDIUM
GMDSS SATCOM SYSTEM

The LT-3100S GMDSS System is the new solution for GMDSS Distress and Safety communication via satellite. The LT-3100S has Wheelmark approval (Module B and D) and is recognized by the IMO and the SOLAS convention, it is much more than an alternative to Inmarsat C, offering 100% global coverage and built-in Safety Voice.

LT-3100S GMDSS IN SHORT
The LT-3100S GMDSS System is fulfilling the new MED directive with Wheel Mark approval. Small and compact. No requirements for either message terminal or printer. The solution will not only offer GMDSS services but also Voice, SMS, and Data. The built-in GNSS/GPS receiver will support features like tracking. Interface for BAM and ECDIS. The Antenna Unit can be installed up to 500 meters from the Control Unit.

• 100% global GMDSS coverage
• Distress Alert & Safety Voice
• Maritime Safety Information (MSI)
• BAM & ECDIS interface
• SSAS & LRIT
• Voice, SMS & Data
• Up to 500 m antenna cable

The standard LT-3100S GMDSS terminal is offered in a version that includes control unit & bracket mount, handset & cradle, antenna unit & power cable. The standard version fulfills all the GMDSS basic requirements. Additional services like SSAS, GMDSS Alarm Panels and printer, will require the LT-3140S Interface Unit.

INTERFACE UNIT
The LT-3140S Interface Unit supports:

• GMDSS Alarm Panels
• GMDSS Printer
• SSAS alarm & test buttons
• ECDIS
• Bridge Alert Management (BAM)
• Maintenance PC

Installation Wizard
The installation and setup of the LT-3100S GMDSS system has been made user-friendly by adding an Installation Wizard that will guide you through the initial configuration and activation of the system on the Iridium GMDSS Gateway (IGS).

Distress Alert

Distress Alert can be activated by pushing the DISTRESS button on the front of the control unit. A Distress Alert message will be sent to the Iridium GMDSS Gateway (IGS) and immediately forwarded to the Rescue Coordination Center (RCC).

Safety Voice

The LT-3100S GMDSS System is supporting both Safety Voice (priority) and standard Voice (non-priority). The terminal can be configured to automatically setup a Safety Voice call (priority: Distress) to the RCC, if the Distress button has been activated.

Specifications for LT-3100S GMDSS SYSTEM

Certification & standards – Maritime CE, FCC, ISED, RCM, RED, MED (Wheel Mark), RoHS 2, Iridium®

LT-3110S Control Unit
Weight – 658 g (1.45 lbs)
Temperature, operational – -15°C to +55°C (+5°F to +131°F)
IP rating, dust and water – IP32
Interfaces – Ethernet, auxiliary, DC input, chassis ground, Antenna Unit (N conn.), Handset, SIM card
Input voltage – 12 – 24 VDC

LT-3120 Handset
Weight – 290 g (0.64 lbs)
Temperature, operational – -15°C to +55°C (+5°F to +131°F)
IP rating, dust and water – IP32

LT-3130 Antenna Unit
Weight – 687 g (1.51 lbs)
Temperature, operational – -40°C to +55°C (-40°F to +131°F)
IP rating, dust and water – IP67
Interfaces – Control Unit (N conn.)
Antenna communication cable – Coaxial cable, up to 500 m (1500 ft)

LT-3140S Interface Unit
Weight – 660 g (1.46 lbs)
Temperature, operational – -15°C to +55°C (+5°F to +131°F)
IP rating, dust and water – IP10
Interfaces – 4 x Ethernet, 2 x RS422, 4 x GPIO, 4 x CAN, DC input, chassis ground
Input voltage – 12 – 24 VDC

LT-3150S Alarm Panel
Weight – 75 g (0.17 lbs)
Temperature, operational – -15°C to +55°C (+5°F to +131°F)
IP rating, dust and water – IP32
Interface – CAN
Warranty 2 year
Maintenance None

LARS Thrane LT-3100s Optional Accessories

lars thrane lt-3100s interface unit
Interface Unit
lars thran lt-3100s alarm panel
Alarm Panel
lars thran lt3100s printer adapter
Printer Adapter
lars thrane lt-3100s pole mount
Pole Mount (1.5″Tube) Antenna Unit
lars thran lt-3100s antenna bracket mount
Bracket Mount 1.5″ to 2.5″ Tube) Antenna Unit
lars thrane lt-3100s control unit bracket mount
Bracket Mount Control Unit
lars thran lt-3100s flush mount bracket
Flush Mount Control Unit
lars thrane lt-3100s power cable
Power Cable 3 Metres
lars thrane lt-3100s aux cable
Aux Cable 3 Metres